The device comes in two variants:

• Integrated into CMB viewing booths and CCS control stations.
• As an independent calibration device.

In the first variant, the calibrator is part of the light settings adjustment module in the control panel of the viewing booth and control station. In the second variant, the calibrator can be used as a separate equipment by connecting it to viewing booths and control stations via a USB port. The calibrator may then be available for measurement and calibration at a time agreed upon with the customer.

In both cases, the calibrator software allows for remote connection to the Lettero service for ongoing parameter control and remote calibration in real-time, supervised by a Lettero specialist. After calibration, a certificate of compliance of the lighting parameters with the required ISO 3664standard is issued.

Artykuł Lettero LED Calibrator ISO 3664 pochodzi z serwisu Lettero - Sprzęt dla poligrafii | Meble metalowe.

CCS station by Lettero means:

• objective color assessment – ISO compliant devices
• metamerism assessment – two D50 and D65 light sources
• flexibility – easy adjustment thanks to a large number of accessories
• low operating costs

CCS D50+D65 S1 specification:

• two light source with D50+D65 tested light temperature
• S1 frame with leveling feet
• available CCS sizes: 1010/1300 / 1600×820 / 920 / 1010×850
• side curtains insulated from the influence of incident spotlight – optional
• no preheating after turning on
• technology compliant with ISO 3664 3668 and 11664-2
• lifetime of the light source over 20000 hours
• electronic control panel with light usage counter
• steady light illumination throughout the whole working surface
• no undesirable flash and light effects – neutral gray N7 color according to ISO
• 2000 lux illuminance according to ISO standard
• Exact color coordinates (10°):
  D50: x = 0.3478 / y = 0.3595 (≤ 0,005)
  D65: x = 0.3138 / y = 0.3309 (≤ 0,005)
• Color Rendering Index (CRI) Ra ≥ 93
• Low metamerism index in the visible range: ≤ 1,0 (MIvis)

Additional CCS station equipment:

• tilting table (in several versions, also with backlight) – makes it easy to evaluate prints or smaller objects at different angles
• keyboard drawer and rotating monitor holder – make it easy to use the computer on a desk
• the spectrophotometer holder – suitable for the most popular devices on the market, enables measurements on the station
• wide possibilities of configuration of the base of the device (shelves, cabinets, drawers) depending on the location of the place of use and customer preferences

Inclined worktop with fixed angle	Inclined worktop with changeable angle	Inclined worktop with half backlight
Inclined worktop with full backlight
Measuring worktop with trolley for spectrophotometer	Measuring worktop with trolley for spectrophotometer and half backlight	Measuring worktop with trolley for spectrophotometer and with full backlight
Monitor holder	Keyboard drawer

Artykuł Color control station CCS D50+D65 S1 pochodzi z serwisu Lettero - Sprzęt dla poligrafii | Meble metalowe.

CCS station by Lettero means:

• objective color assessment – ISO compliant devices
• metamerism assessment – two D50 and D65 light sources available
• flexibility – easy adjustment thanks to a large number of accessories
• low operating costs

CCS D65 S1 specification:

• light source with D65 tested light temperature
• S1 frame with leveling feet
• available CCS sizes: 1010/1300 / 1600×820 / 920 / 1010×850
• side curtains insulated from the influence of incident spotlight – optional
• no preheating after turning on
• technology compliant with ISO 3664 3668 and 11664-2
• lifetime of the light source over 20000 hours
• electronic control panel with light usage counter
• steady light illumination throughout the whole working surface
• no undesirable flash and light effects – neutral gray N7 color according to ISO
• 2000 lux illuminance according to ISO standard
• Exact color coordinates (10°):
  D50: x = 0.3478 / y = 0.3595 (≤ 0,005)
  D65: x = 0.3138 / y = 0.3309 (≤ 0,005)
• Color Rendering Index (CRI) Ra ≥ 93
• Low metamerism index in the visible range: ≤ 1.0 (MIvis)

Additional CCS station equipment:

• tilting table (in several versions, also with backlight) – makes it easy to evaluate prints or smaller objects at different angles
• keyboard drawer and rotating monitor holder – make it easy to use the computer on a desk
• the spectrophotometer holder – suitable for the most popular devices on the market, enables measurements on the station
• wide possibilities of configuration of the base of the device (shelves, cabinets, drawers) depending on the location of the place of use and customer preferences

Inclined worktop with fixed angle	Inclined worktop with changeable angle	Inclined worktop with half backlight
Inclined worktop with full backlight
Measuring worktop with trolley for spectrophotometer	Measuring worktop with trolley for spectrophotometer and half backlight	Measuring worktop with trolley for spectrophotometer and with full backlight
Monitor holder	Keyboard drawer

Artykuł Color control station CCS D65 S1 pochodzi z serwisu Lettero - Sprzęt dla poligrafii | Meble metalowe.

CCS station by Lettero means:

• objective color assessment – ISO compliant devices
• metamerism assessment – two D50 and D65 light sources available
• flexibility – easy adjustment thanks to a large number of accessories
• low operating costs

CCS D50 S1 specification:

• light source with D50 tested light temperature
• S1 frame with leveling feet
• available CCS sizes: 1010/1300 / 1600×820 / 920 / 1010×850
• side curtains insulated from the influence of incident spotlight – optional
• no preheating after turning on
• technology compliant with ISO 3664 3668 and 11664-2
• lifetime of the light source over 20000 hours
• electronic control panel with light usage counter
• steady light illumination throughout the whole working surface
• no undesirable flash and light effects – neutral gray N7 color according to ISO
• 2000 lux illuminance according to ISO standard
• Exact color coordinates (10°):
  D50: x = 0.3478 / y = 0.3595 (≤ 0,005)
  D65: x = 0.3138 / y = 0.3309 (≤ 0,005)
• Color Rendering Index (CRI) Ra ≥ 93
• Low metamerism index in the visible range: ≤ 1.0 (MIvis)

Additional CCS station equipment:

• tilting table (in several versions, also with backlight) – makes it easy to evaluate prints or smaller objects at different angles
• keyboard drawer and rotating monitor holder – make it easy to use the computer on a desk
• the spectrophotometer holder – suitable for the most popular devices on the market, enables measurements on the station
• wide possibilities of configuration of the base of the device (shelves, cabinets, drawers) depending on the location of the place of use and customer preferences

Inclined worktop with fixed angle	Inclined worktop with changeable angle	Inclined worktop with half backlight
Inclined worktop with full backlight
Measuring worktop with trolley for spectrophotometer	Measuring worktop with trolley for spectrophotometer and half backlight	Measuring worktop with trolley for spectrophotometer and with full backlight
Monitor holder	Keyboard drawer

Artykuł Color control station CCS D50 S1 pochodzi z serwisu Lettero - Sprzęt dla poligrafii | Meble metalowe.

CCS station by Lettero means:

• objective color assessment – ISO compliant devices, FOGRA certificated
• metamerism assessment – two D50 and D65 light sources, smooth light intensity adjustment
• flexibility – easy adjustment thanks to a large number of accessories
• low operating costs – long life of light sources thanks to LED technology

CCS LED D50+D65 S1 specification:

• two LED light source with D50+D65 tested light temperature
• S1 frame with leveling feet
• available CCS sizes: 1010/1300 / 1600×820 / 920 / 1010×850
• side curtains insulated from the influence of incident spotlight – optional
• no preheating after turning on
• electronic controller
• LED technology compliant with ISO 3664 3668 and 11664-2
• smooth light intensity adjustment ranging from 10% to 100%
• lifetime of the light source over 50000 hours
• electronic control panel with light usage counter
• stable light output up to 30.000 working hours (above 30.000 calibration is required)
• steady light illumination throughout the whole working surface
• no undesirable flash and light effects – neutral gray N7 color according to ISO
• 2000 lux illuminance according to ISO standard
• Exact color coordinates (10°):
  D50: x = 0.3478 / y = 0.3595 (≤ 0,002)
  D65: x = 0.3138 / y = 0.3309 (≤ 0,002)
• Color Rendering Index (CRI) Ra ≥ 95
• Low metamerism index in the visible range: ≤ 0.8 (MIvis)

Additional CCS station equipment:

• tilting table (in several versions, also with backlight) – makes it easy to evaluate prints or smaller objects at different angles
• keyboard drawer and rotating monitor holder – make it easy to use the computer on a desk
• the spectrophotometer holder – suitable for the most popular devices on the market, enables measurements on the station
• wide possibilities of configuration of the base of the device (shelves, cabinets, drawers) depending on the location of the place of use and customer preferences

Inclined worktop with fixed angle	Inclined worktop with changeable angle	Inclined worktop with half backlight
Inclined worktop with full backlight
Measuring worktop with trolley for spectrophotometer	Measuring worktop with trolley for spectrophotometer and half backlight	Measuring worktop with trolley for spectrophotometer and with full backlight
Monitor holder	Keyboard drawer

Artykuł Color control station CCS LED D50+D65 S1 pochodzi z serwisu Lettero - Sprzęt dla poligrafii | Meble metalowe.

CCS station by Lettero means:

• objective color assessment – ISO compliant devices
• metamerism assessment – two D50 and D65 light sources available, smooth light intensity adjustment
• flexibility – easy adjustment thanks to a large number of accessories
• low operating costs – long life of light sources thanks to LED technology

CCS LED D65 S1 specification:

• LED light source with D65 tested light temperature
• S1 frame with leveling feet
• available CCS sizes: 1010/1300 / 1600×820 / 920 / 1010×850
• side curtains insulated from the influence of incident spotlight – optional
• no preheating after turning on
• electronic controller
• LED technology compliant with ISO 3664 3668 and 11664-2
• smooth light intensity adjustment ranging from 10% to 100%
• lifetime of the light source over 50000 hours
• electronic control panel with light usage counter
• stable light output up to 30.000 working hours (above 30.000 calibration is required)
• steady light illumination throughout the whole working surface
• no undesirable flash and light effects – neutral gray N7 color according to ISO
• 2000 lux illuminance according to ISO standard
• Exact color coordinates (10°):
  D50: x = 0.3478 / y = 0.3595 (≤ 0,002)
  D65: x = 0.3138 / y = 0.3309 (≤ 0,002)
• Color Rendering Index (CRI) Ra ≥ 95
• Low metamerism index in the visible range: ≤ 0.8 (MIvis)

Additional CCS station equipment:

• tilting table (in several versions, also with backlight) – makes it easy to evaluate prints or smaller objects at different angles
• keyboard drawer and rotating monitor holder – make it easy to use the computer on a desk
• the spectrophotometer holder – suitable for the most popular devices on the market, enables measurements on the station
• wide possibilities of configuration of the base of the device (shelves, cabinets, drawers) depending on the location of the place of use and customer preferences

Inclined worktop with fixed angle	Inclined worktop with changeable angle	Inclined worktop with half backlight
Inclined worktop with full backlight
Measuring worktop with trolley for spectrophotometer	Measuring worktop with trolley for spectrophotometer and half backlight	Measuring worktop with trolley for spectrophotometer and with full backlight
Monitor holder	Keyboard drawer

Artykuł Color control station CCS LED D65 S1 pochodzi z serwisu Lettero - Sprzęt dla poligrafii | Meble metalowe.

CCS station by Lettero means:

• objective color assessment – ISO compliant devices
• metamerism assessment – two D50 and D65 light sources available, smooth light intensity adjustment
• flexibility – easy adjustment thanks to a large number of accessories
• low operating costs – long life of light sources thanks to LED technology

CCS LED D50 S1 specification:

• LED light source with D50 tested light temperature
• S1 frame with leveling feet
• available CCS sizes: 1010/1300 / 1600×820 / 920 / 1010×850
• side curtains insulated from the influence of incident spotlight – optional
• no preheating after turning on
• electronic controller
• LED technology compliant with ISO 3664 3668 and 11664-2
• smooth light intensity adjustment ranging from 10% to 100%
• lifetime of the light source over 50000 hours
• electronic control panel with light usage counter
• stable light output up to 30.000 working hours (above 30.000 calibration is required)
• steady light illumination throughout the whole working surface
• no undesirable flash and light effects – neutral gray N7 color according to ISO
• 2000 lux illuminance according to ISO standard
• Exact color coordinates (10°):
  D50: x = 0.3478 / y = 0.3595 (≤ 0,002)
  D65: x = 0.3138 / y = 0.3309 (≤ 0,002)
• Color Rendering Index (CRI) Ra ≥ 95
• Low metamerism index in the visible range: ≤ 0.8 (MIvis)

Additional CCS station equipment:

• tilting table (in several versions, also with backlight) – makes it easy to evaluate prints or smaller objects at different angles
• keyboard drawer and rotating monitor holder – make it easy to use the computer on a desk
• the spectrophotometer holder – suitable for the most popular devices on the market, enables measurements on the station
• wide possibilities of configuration of the base of the device (shelves, cabinets, drawers) depending on the location of the place of use and customer preferences

Inclined worktop with fixed angle	Inclined worktop with changeable angle	Inclined worktop with half backlight
Inclined worktop with full backlight
Measuring worktop with trolley for spectrophotometer	Measuring worktop with trolley for spectrophotometer and half backlight	Measuring worktop with trolley for spectrophotometer and with full backlight
Monitor holder	Keyboard drawer

Artykuł Color control station CCS LED D50 S1 pochodzi z serwisu Lettero - Sprzęt dla poligrafii | Meble metalowe.

CCS station by Lettero means:

• objective color assessment – ISO compliant devices
• metamerism assessment – two D50 and D65 light sources
• flexibility – easy adjustment thanks to a large number of accessories
• low operating costs

CCS D50+D65 S3 specification:

• two light source with D50+D65 tested light temperature
• S3 rack with leveling feet, drawer, keyboard drawer and shelf
• available CCS sizes: 1010/1300 / 1600×820 / 920 / 1010×850
• side curtains insulated from the influence of incident spotlight – optional
• no preheating after turning on
• technology compliant with ISO 3664 3668 and 11664-2
• lifetime of the light source over 20000 hours
• electronic control panel with light usage counter
• steady light illumination throughout the whole working surface
• no undesirable flash and light effects – neutral gray N7 color according to ISO
• 2000 lux illuminance according to ISO standard
• Exact color coordinates (10°):
  D50: x = 0.3478 / y = 0.3595 (≤ 0,005)
  D65: x = 0.3138 / y = 0.3309 (≤ 0,005)
• Color Rendering Index (CRI) Ra ≥ 93
• Low metamerism index in the visible range: ≤ 1,0 (MIvis)

Additional CCS station equipment:

• tilting table (in several versions, also with backlight) – makes it easy to evaluate prints or smaller objects at different angles
• keyboard drawer and rotating monitor holder – make it easy to use the computer on a desk
• the spectrophotometer holder – suitable for the most popular devices on the market, enables measurements on the station
• wide possibilities of configuration of the base of the device (shelves, cabinets, drawers) depending on the location of the place of use and customer preferences

Inclined worktop with fixed angle	Inclined worktop with changeable angle	Inclined worktop with half backlight
Inclined worktop with full backlight
Measuring worktop with trolley for spectrophotometer	Measuring worktop with trolley for spectrophotometer and half backlight	Measuring worktop with trolley for spectrophotometer and with full backlight
Monitor holder	Keyboard drawer

Artykuł Color control station CCS D50+D65 S3 pochodzi z serwisu Lettero - Sprzęt dla poligrafii | Meble metalowe.

CCS station by Lettero means:

• objective color assessment – ISO compliant devices
• metamerism assessment – two D50 and D65 light sources available
• flexibility – easy adjustment thanks to a large number of accessories
• low operating costs

CCS D65 S3 specification:

• light source with D65 tested light temperature
• S3 rack with leveling feet, drawer, keyboard drawer and shelf
• available CCS sizes: 1010/1300 / 1600×820 / 920 / 1010×850
• side curtains insulated from the influence of incident spotlight – optional
• no preheating after turning on
• technology compliant with ISO 3664 3668 and 11664-2
• lifetime of the light source over 20000 hours
• electronic control panel with light usage counter
• steady light illumination throughout the whole working surface
• no undesirable flash and light effects – neutral gray N7 color according to ISO
• 2000 lux illuminance according to ISO standard
• Exact color coordinates (10°):
  D50: x = 0.3478 / y = 0.3595 (≤ 0,005)
  D65: x = 0.3138 / y = 0.3309 (≤ 0,005)
• Color Rendering Index (CRI) Ra ≥ 93
• Low metamerism index in the visible range: ≤ 1.0 (MIvis)

Additional CCS station equipment:

• tilting table (in several versions, also with backlight) – makes it easy to evaluate prints or smaller objects at different angles
• keyboard drawer and rotating monitor holder – make it easy to use the computer on a desk
• the spectrophotometer holder – suitable for the most popular devices on the market, enables measurements on the station
• wide possibilities of configuration of the base of the device (shelves, cabinets, drawers) depending on the location of the place of use and customer preferences

Inclined worktop with fixed angle	Inclined worktop with changeable angle	Inclined worktop with half backlight
Inclined worktop with full backlight
Measuring worktop with trolley for spectrophotometer	Measuring worktop with trolley for spectrophotometer and half backlight	Measuring worktop with trolley for spectrophotometer and with full backlight
Monitor holder	Keyboard drawer

Artykuł Color control station CCS D65 S3 pochodzi z serwisu Lettero - Sprzęt dla poligrafii | Meble metalowe.

CCS station by Lettero means:

• objective color assessment – ISO compliant devices
• metamerism assessment – two D50 and D65 light sources available
• flexibility – easy adjustment thanks to a large number of accessories
• low operating costs

CCS D50 S3 specification:

• light source with D50 tested light temperature
• S3 rack with leveling feet, drawer, keyboard drawer and shelf
• available CCS sizes: 1010/1300 / 1600×820 / 920 / 1010×850
• side curtains insulated from the influence of incident spotlight – optional
• no preheating after turning on
• technology compliant with ISO 3664 3668 and 11664-2
• lifetime of the light source over 20000 hours
• electronic control panel with light usage counter
• steady light illumination throughout the whole working surface
• no undesirable flash and light effects – neutral gray N7 color according to ISO
• 2000 lux illuminance according to ISO standard
• Exact color coordinates (10°):
  D50: x = 0.3478 / y = 0.3595 (≤ 0,005)
  D65: x = 0.3138 / y = 0.3309 (≤ 0,005)
• Color Rendering Index (CRI) Ra ≥ 93
• Low metamerism index in the visible range: ≤ 1.0 (MIvis)

Additional CCS station equipment:

• tilting table (in several versions, also with backlight) – makes it easy to evaluate prints or smaller objects at different angles
• keyboard drawer and rotating monitor holder – make it easy to use the computer on a desk
• the spectrophotometer holder – suitable for the most popular devices on the market, enables measurements on the station
• wide possibilities of configuration of the base of the device (shelves, cabinets, drawers) depending on the location of the place of use and customer preferences

Inclined worktop with fixed angle	Inclined worktop with changeable angle	Inclined worktop with half backlight
Inclined worktop with full backlight
Measuring worktop with trolley for spectrophotometer	Measuring worktop with trolley for spectrophotometer and half backlight	Measuring worktop with trolley for spectrophotometer and with full backlight
Monitor holder	Keyboard drawer

Artykuł Color control station CCS D50 S3 pochodzi z serwisu Lettero - Sprzęt dla poligrafii | Meble metalowe.